Delivery Scope
testo 103 food thermometer with foldable temperature sensor, user guide, calibration protocol, batteries.
Food Thermometer (Foldable) - Testo 103
Model No: Testo 103
Part No: 0560 0103
The smallest folding food thermometer in its class, testo 103 –for carrying out spot checks in the food industry, ideal for checking incoming goods, catering services, canteens and commercial kitchens, as well as cold storage rooms and supermarkets.
- Ideally suited for applications in the food sector
- Easy to operate Handy and small – fits in any trouser or jacket pocket
- Robust probe with narrow measurement tip
- Hygienic and easy-to-clean measurement tip
- Splash-proof according to IP55
- Certified according to EN 13485
The testo 103 food thermometer is just a little over 11 cm long, which makes it the smallest folding food temperature thermometer in its class. In fact, it’s so small it fits in any shirt or trouser pocket, so it’s always accompanying you whenever you need it. The probe can also be folded while not in use, to avoid any damages.
The testo 103 food thermometer – ideal for food safety inspections
The testo 103 food temperature thermometer can be used everywhere where food is sold, stored or processed. It is ideal for checking incoming goods, catering services, canteens and commercial kitchens, as well as cold storage rooms and supermarkets, and for ensuring that temperatures are kept and quality and hygiene standards are met.
The sleek food thermometer with rugged sensor tip makes it ideal for carrying out spot checks on liquid and semi-solid media where it leaves virtually no trace.
It can also measure the core temperature of foodstuffs when the probe has been folded out at an angle of only 30°. This is particularly convenient – and often necessary – as it is not always possible to carry out measurements at an angle of 180° when checking food in certain storage spaces or when it is piled high in boxes or on display.
When you have finished carrying out your checks, simply fold the probe away and pop the thermometer back into your pocket until you need it again.The testo 103 food probe thermometer is not only HACCP compliant and EN 13485 certified but also splash water protected making it ideal for use in the food sector.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +220 °C |
| Accuracy | ±0.5 °C (-30 to +99.9 °C),±1.0 % of mv (+100 to +220 °C) |
| Resolution | 0.1 °C |
| Reaction time | t99 = 10 s (Measured in moving liquid) |
| General technical data | |
| Weight | 46 g (including battery) |
| Dimensions | 189 x 35 x 19 mm (probe folded out),115 x 35 x 19 mm (probe folded away) |
| Operating temperature | -20 to +60 °C |
| Product-/housing material | ABS |
| Protection class | IP55 |
| Product colour | White |
| Length probe shaft | 75 mm |
| Length probe shaft tip | 22 mm |
| Diameter probe shaft | 3 mm |
| Diameter probe shaft tip | 2.3 mm |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| Battery life | 300 h (at +25 °C) |
| Storage temperature | -30 to +70 °C |
testo 104 food thermometer with folding temperature sensor, user guide, calibration protocol, adhesive color strips, batteries.
Waterproof Food Thermometer (Foldable) - Testo 104
Model No: Testo 104
Part No: 0560 0104
The first folding waterproof food thermometer testo 104 allows you to carry out quick and easy spot checks during the production, storage and processing of food.
- Ideally suited for applications in the food sector
- Easy to operate Handy and small – fits in any trouser or jacket pocket
- Robust probe with narrow measurement tip
- Hygienic and easy-to-clean measurement tip
- Splash-proof according to IP55
- Certified according to EN 13485.
The testo 103 food thermometer is just a little over 11 cm long, which makes it the smallest folding food temperature thermometer in its class. In fact, it’s so small it fits in any shirt or trouser pocket, so it’s always accompanying you whenever you need it. The probe can also be folded while not in use, to avoid any damages.
The testo 103 food thermometer – ideal for food safety inspections
The testo 103 food temperature thermometer can be used everywhere where food is sold, stored or processed. It is ideal for checking incoming goods, catering services, canteens and commercial kitchens, as well as cold storage rooms and supermarkets, and for ensuring that temperatures are kept and quality and hygiene standards are met.
The sleek food thermometer with rugged sensor tip makes it ideal for carrying out spot checks on liquid and semi-solid media where it leaves virtually no trace.
It can also measure the core temperature of foodstuffs when the probe has been folded out at an angle of only 30°. This is particularly convenient – and often necessary – as it is not always possible to carry out measurements at an angle of 180° when checking food in certain storage spaces or when it is piled high in boxes or on display.
When you have finished carrying out your checks, simply fold the probe away and pop the thermometer back into your pocket until you need it again.The testo 103 food probe thermometer is not only HACCP compliant and EN 13485 certified but also splash water protected making it ideal for use in the food sector.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +220 °C |
| Accuracy | ±0.5 °C (-30 to +99.9 °C),±1.0 % of mv (+100 to +220 °C) |
| Resolution | 0.1 °C |
| Reaction time | t99 = 10 s (Measured in moving liquid) |
| General technical data | |
| Weight | 46 g (including battery) |
| Dimensions | 189 x 35 x 19 mm (probe folded out),115 x 35 x 19 mm (probe folded away) |
| Operating temperature | -20 to +60 °C |
| Product-/housing material | ABS |
| Protection class | IP55 |
| Product colour | White |
| Length probe shaft | 75 mm |
| Length probe shaft tip | 22 mm |
| Diameter probe shaft | 3 mm |
| Diameter probe shaft tip | 2.3 mm |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| Battery life | 300 h (at +25 °C) |
| Storage temperature | -30 to +70 °C |
testo 925 digital temperature thermometer, including batteries and calibration protocol. Note: the temperature measuring instrument requires a probe for commissioning (not included in the scope of delivery).
Temperature thermometer - Testo 925
Model No: Testo 925
Part No: 0560 9250
The first folding waterproof food thermometer testo 104 allows you to carry out quick and easy spot checks during the production, storage and processing of food.
- Ideally suited for applications in the food sector
- Easy to operate Handy and small – fits in any trouser or jacket pocket
- Robust probe with narrow measurement tip
- Hygienic and easy-to-clean measurement tip
- Splash-proof according to IP55
- Certified according to EN 13485.
A robust metal folding joint, a rubber-coated anti-slip surface, a long and precise temperature sensor and waterproof into the bargain! The testo 104 waterproof food thermometer comes with a whole host of practical features and benefits for use in the food industry.
The food probe thermometer for the food industry Temperature checks play a vital role in quality assurance, cold chain documentation and hygiene regulations. The testo 104 waterproof food thermometer allows you to carry out quick and easy spot checks during the production, storage and processing of food. The food probe thermometer measures the core temperature of liquid, semi-solid and viscous media.
The sleek thermometer with rugged sensor tip leaves virtually no trace when inserted. The thermometer can also measure the core temperature of food when the probe has been folded out at an angle of only 30°. This allows you to carry out reliable checks in difficult-to-reach places.
The testo 104 is the only folding waterproof food thermometer which can be cleaned under running water after carrying out meassurements. The probe’s rugged metal joint allows it to be folded away and kept in its protective case until you need it again. And here’s another practical feature: the testo 104 waterproof food thermometer comes with a set of adhesive color strips which you can attachto the individual meters when more than one of the same model are being used.
The testo 104 food probe thermometer is not only HACCP compliant and EN 13485 certified but also splash water protected making it ideal for use in the food sector.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -50 to +250 °C |
| Accuracy | ±1.0 °C (-50 to -30.1 °C),±0.5 °C (-30 to +99.9 °C),±1 % of mv (+100 to +250 °C) |
| Resolution | 0.1 °C |
| Reaction time | t99 = 10 s (measured in moving liquid) |
| General technical data | |
| Dimensions | 265 x 47 x 20 mm (Probe folded out),163 x 47 x 20 mm (probe folded away) |
| Operating temperature | -20 to +60 °C |
| Product-/housing material | ABS / ABS-PC fibre glass 10% |
| Protection class | IP65 |
| Product colour | White |
| Length probe shaft | 102 mm |
| Length probe shaft tip | 32 mm |
| Diameter probe shaft | 3 mm |
| Diameter probe shaft tip | 2.3 mm |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| EU-/EG-guidelines | 2004/108/EG |
| Battery Type | 2 AAA micro batteries |
| Battery life | 100 h (at +25 °C without display illumination) |
| Storage temperature | -30 to +70 °C |
| Weight | 165 g (incl. batteries) |
testo 922 temperature meter, calibration protocol, batteries.
Temperature meter - Testo 922
Model No: Testo 922
Part No: 0560 9221
The digital temperature meter testo 922 is ideal for professional temperature measurements of heating, plumbing and air conditioning with up to three temperature sensors and direct display of temperature differences.
- Ideally suited for applications in the HVAC field
- 2-channel temperature measuring instrument with optional wireless probes
- Display of differential temperature
- TopSafe, the indestructible protective cover, protects from dirt and impact
- Continuous display of min./max. values
- Hold-button for freezing measurement values
- Cyclic printing of measurement values, e.g. once per minute
The testo 922 digital temperature meter measures temperatures and determines the temperature difference in fraction of seconds. The temperature meter comes with connecting points for up to two temperature sensors and wireless connectivity for a third sensor.
At-a-glance look at all the features
– Connecting points for 2 optional type K temperature sensors
– Wireless connectivity for a third temperature sensor
– Temperature values and temperature difference directly visible in display
– Permanent display of min and max values
– Hold function that freezes the last reading
The testo 922 temperature meter – accessories and sensors
– There is a wide selection of optional temperature and wireless sensors to help you carry out your temperature measurements
– The testo protocol printer allows you to print out on site; the cyclic pressure can be used in adjustable (i.e. one-minute) intervals
– The durable, IP65 rated TopSafe protective case protects you digital temperature meter against impact and dirt and water ingress
The testo 922 temperature meter – areas of application
Professionals in the fields of heating, plumbing and air conditioning are quick to appreciate the benefits which the compact, easy-to-use testo 922 digital temperature meter has to offer. The testo 922 temperature meter measures temperatures quickly and accurately and determines the temperature difference directly. This allows you to carry out your inspections and checks quickly and efficiently. There’s also an optional testo turbo printer which allows you to print out on site.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -50 to +1000 °C |
| Accuracy | ±(0.5 °C + 0.3 % of mv) (-40 to +900 °C),±(0.7 °C + 0.5 % of mv) (Remaining Range) |
| Resolution | 0.1 °C (-50 to +199.9 °C),1 °C (Remaining Range) |
| General technical data | |
| Dimensions | 182 x 64 x 40 mm |
| Operating temperature | -20 to +50 °C |
| Housing | ABS |
| Number of channels | 2-channel |
| Battery type | 9V block battery, 6F22 |
| Battery life | 200 h (connected probe, backlight off); 45 h (radio mode, backlight off); 68 h (connected probe, backlight always on); 33 h (radio mode, backlight always on) |
| Storage temperature | -40 to +70 °C |
| Weight | 171 g |
The testo 735-1 temperature measuring instrument (3-channel) with an acoustic alarm, including calibration protocol and batteries. CAUTION: The instrument can only be commissioned with a probe. These are available separately
Temperature Measuring Instrument - Testo 735-1
Model No: Testo 735-1
Part No: 0560 7351
The multichannel temperature measuring instrument testo 735 can measure the surface, air and core temperature of a whole range of media and thus can be used for measuring temperature distribution in air conditioning cabinets and refrigerators, etc.
- Highest precision over the entire measuring range thanks to system adjustment
- System accuracy up to 0.05 °C
- Audible alarm (adjustable limit values)
- Cyclic printing of measurement values, e.g once per minute
- Protection class IP65
- Certified according to EN 13485.
The testo 735-1 temperature measuring instrument can deal with almost all measuring tasks. That is because the comprehensive selection of optional probes enables reliable temperature measurement in a variety of areas. This means you can for instance use the measuring instrument in chemical laboratories for temperature measurement in aggressive media, for measuring temperature distribution in air conditioning cabinets and refrigerators, for calibrating stationary temperature probes or in the food industry for measuring core temperature.
Measure surface, air and core temperature – in up to 6 locations at the same time. Whether your work involves core temperatures, surface temperatures or air temperatures – choose the temperature probes that are appropriate for you from our large selection of probes and measure the temperature in up to six locations at the same time with the testo 735-1 temperature measuring device.
The temperature measuring instrument has one probe input for attaching high-precision Pt100 probes and two inputs for attaching fast thermocouple probes of the K, T, J and S types. Take advantage of wireless measurement data transfer by radio as well. The optional radio module means you can receive readings from up to three further optional radio temperature probes on the testo 735-1. The radio probes send the temperature values to the temperature measuring instrument over a distance of up to 20 meters where there are no obstructions. Wireless measurement enables you to avoid damage to cables or hindrances to handling.
Accurate temperature measurement with Pt100 temperature probe, Pt100 technology enables you to achieve very accurate temperature measurements with the testo 735-1. The high-precision Pt100 immersion/penetration probe (optional) thus achieves system accuracy of up to 0.05 °C with a resolution of 0.001 °C. The temperature measuring instrument is therefore ideally suited to use as a working standard for calibration of stationary temperature probes.
The testo 735-1 temperature measuring device does not just display the temperatures currently being measured. Min./max. and mean values are also shown on the instrument display. When two temperature probes are attached, the temperature measuring instrument calculates the differential temperature and displays this as delta T. In addition, an acoustic alarm sounds when limit values are undershot or exceeded. You are free to define the limit values.
The display illumination also enables easy reading of measuring values even in dark surroundings. In addition, the testo 735-1 temperature measuring instrument is waterproof according to protection class IP 65, has been tested in accordance with EN 13485, is HACCP-compliant and has international HACCP certification.
Documentation of measurement data on site via the testo fast printer If you need evidence of the measured temperature values, we offer our optional testo fast printer as an accessory for the temperature measuring instrument. You can use this to print out the current temperature values or the min./max. values on site.
We recommend you use the testo 735-2 version for saving, documenting and archiving measurement data. This temperature measuring instrument also has a reading memory and PC software.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -200 to +1370 °C |
| Accuracy | ±0.3 °C (-60 to +60 °C),±(0.2 °C + 0.3 % of mv) (Remaining Range) |
| Resolution | 0.1 °C |
| General technical data | |
| Dimensions | 220 x 74 x 46 mm |
| Operating temperature | -20 to +50 °C |
| Housing | ABS / TPE / Metal |
| Protection class | IP65 |
| Battery type | Alkali manganese, mignon, type AA |
| Standards | EN 13485 |
| Storage temperature | -30 to +70 °C |
| Weight | 428 g |
Delivery Scope
Waterproof mini probe thermometer, protective sleeve and batteries
Waterproof mini probe thermometer - Mini thermometer
Model No: Mini thermometer
Part No:0560 1113
Small but highly reliable testo mini penetration/ surface thermometer is perfect for measuring liquid temperatures or on surfaces quickly and reliably. It also helps in measuring core temperature.
- Universally applicable
- Self-explanatory and robust
- Ready for use at the press of a button
Low in price, high in performance: the waterproof mini probe thermometer measures the core temperature of liquid, soft and powdery media and the ambient air temperature as well.
After carrying out the measurements, it can either be cleaned under running water or can be popped into the dishwasher before keeping it into the protective case that comes with the delivery. The mini thermometer also has an integrated clip to stop it from slipping out of your shirt or jacket pocket.
A variety of different applications for the waterproof mini probe thermometer
From checking the Sunday roast (but don’t forget to take it out of the oven!) to carrying out temperature checks during production processes; from measuring the air temperature in air conditioning units to checking the temperature of different media in garden centers or laboratories, the waterproof mini thermometer is ideal for use in a variety of different applications and environments since it can measure both the air and the core temperature of different materials.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -20 to +230 °C |
| Accuracy | ±1 °C (-20 to +53.9 °C),±0.8 °C (+54 to +90 °C),±1 °C (+90 to +180 °C),±1.5 °C (+180.1 to +230 °C) |
| Resolution | 0.1 °C (-19.9 to +199.9 °C),1 °C (Remaining Range) |
| General technical data | |
| Operating temperature | -10 to +50 °C |
| Length probe shaft | 120 mm |
Delivery Scope
Testo 830-T1 infrared temperature gun, including batteries and factory calibration protocol.
Infrared Temperature Gun - Testo 830-T1
Model No:Testo 830-T1
Part No:0560 8311
The testo 830-T1 infrared temperature gun equips you for efficient, non-contact surface temperature measurements for undertaking control measurements in trade and industry.
- Laser measurement point marker and large optics for exact measurement even at greater distances Fast recording of measurement values at two measurements per second
- Adjustable emissivity
- Two adjustable alarm limit values
- Good handling thanks to ergonomic “pistol design“
- Hold function and display of min./max. values
- Distance to measurement spot 10:1
- measurement spot marking 1-point laser
The testo 830-T1 infrared temperature gun with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry.
Overview of the advantages of the testo 830-T1 infrared temperature gun :
testo 830-T1 infrared temperature gun facilitates fast and accurate non-contact measurement of the surface
temperature (2 measurements a second). To summarise, the infrared temperature gun offers the following advantages:
– High resolution processor for utmost accuracy (resolution 0.1 °C)
– 10:1 optics for precise measurements even at medium distances
– IR thermometer with 1 point laser measurement spot marker to target the measuring point
– Two alarm limit values that can be defined as required
– Visual and acoustic alarm if limit value exceeded
– Min./max. value display and hold function (to record a measured value)
– Convenient one-handed operation thanks to the ergonomic gun-style design
– Clear, illuminated digital display
The speed of the testo 830-T1 infrared temperature thermometer is impressive: it can take two measurements per second that helps you undertake bigger measuring tasks quickly and efficiently.
For infrared temperature gun, the emission level can be individually set. This allows you to adjust it precisely to the surface of the material being measured, to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR temperature measurement significantly easier.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +400 °C |
| Accuracy | ±1.5 °C (-20 to 0 °C),±2 °C (-30 to -20.1 °C),±1 °C or ±1 % of mv (Remaining Range) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Dimensions | 190 x 75 x 38 mm |
| Operating temperature | -20 to +50 °C |
| Housing | ABS |
| Battery type | 9V block battery |
| Battery life | 15 h |
| Storage temperature | -40 to +70 °C |
| Weight | 200 g |
IR Temperature Gun– - testo 830-T2
Model No: Testo 830-T2
Part No:0560 8311
The testo 830-T2 infrared temperature gun equips you for efficient, non-contact surface temperature measurements for undertaking control measurements in trade and industry.
- Laser measurement point marker and large optics for exact measurement even at greater distances Fast recording of measurement values at two measurements per second
- Adjustable emissivity
- Two adjustable alarm limit values
- Good handling thanks to ergonomic “pistol design“
- Hold function and display of min./max. values
- Distance to measurement spot 12:1
- Measurement spot marking 2-point laser
- Contact external thermocouple (TC type K) for contact type Measurement
The testo 830-T2 IR thermometer with laser measurement spot marker and 12:1 optics is suitable for non-contact surface temperature measurements in trade and industry.
Overview of the advantages offered by the testo 830-T2 IR thermometer :
With the testo 830-T2 IR thermometer, non-contact measurement of surface temperature is accurate and fast (2 measurements per second). To summarise, the IR thermometer offers the following advantages:
High resolution processor for utmost accuracy (resolution 0.1 °C)
– 12:1 optics for precise measurements even at medium distances
– IR thermometer with 2-point laser measurement spot marker to target the measuring point
– Two alarm limit values that can be defined as required
– Visual and acoustic alarm if limit value exceeded
– Min./max. value display and hold function (to record a measured value)
– Convenient one-handed operation thanks to the ergonomic gun-style design
– Clear, illuminated digital display
– External probe connection for thermocouple temperature probes TC type K
The speed of the testo 830-T2 IR thermometer is also very impressive: it can carry out two measurements per second. This means you can undertake bigger measuring tasks quickly and efficiently.
In addition to infrared measurement, the testo 830-T2 infrared thermometer also offers the option of carrying out a contact measurement. Simply connect an optionally available TC type K temperature probe to the infrared measuring instrument. Testo offers a large selection of probes: e.g. a fast-action surface probe with sprung thermocouple strip, but also air probes or immersion/penetration probes (for liquids and pastes).
The IR thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +400 °C |
| Accuracy | ±1.5 °C (-20 to 0 °C),±2 °C (-30 to -20.1 °C),±1 °C or ±1 % of mv (Remaining Range) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Dimensions | 190 x 75 x 38 mm |
| Operating temperature | -20 to +50 °C |
| Housing | ABS |
| Battery type | 9V block battery |
| Battery life | 15 h |
| Storage temperature | -40 to +70 °C |
| Weight | 200 g |
Laser Temperature Gun - testo 830-T4
Model No: testo 830-T4
Part No:0560 8314
The testo 830-T4 infrared temperature gun equips you for efficient, non-contact surface temperature measurements for undertaking control measurements in trade and industry.
- Laser measurement point marker and large optics for exact measurement even at greater distances Fast recording of measurement values at two measurements per second
- Adjustable emissivity
- Two adjustable alarm limit values
- Good handling thanks to ergonomic “pistol design“
- Hold function and display of min./max. values
- Distance to measurement spot 30:1
- Measurement spot marking 2-point laser
- Contact external thermocouple (TC type K) for contact type Measurement.
With the testo 830-T4 laser temperature gun you will be well equipped for non-contact surface temperature measurements in industry and trade. It is especially distinguished by its 30:1 optics, which also enables the laser temperature gun to record extremely small measuring spots at a great distance. This therefore allows moving or dangerous objects to be measured from a safe distance.
All key advantages of the laser temperature gun at a glance. The laser temperature gun with laser measurement spot marker not only measures the surface temperature accurately, but also quickly (2 measurements a second). Benefit from these and other advantages of the non contact infrared thermometer:- High resolution processor provides accurate results (resolution 0.1 °C)
- 30:1 optics enable great accuracy at great distances on small objects being measured (1 m distance = 36 mm measuring spot diameter)
- Laser temperature gun with 2 point laser measurement spot marker: the measuring point can be precisely defined (= surface between the two laser points)
- Two limit values that can be defined as required
- Visual and acoustic alarm if limit values are exceeded
- Min./max. temperature display and hold function (to “freeze” a certain measured value)
- An external temperature probe can be connected, e.g. to determine the emission level of the surface, or for additional contact temperature measurement
- Convenient operation (even with just one hand) thanks to the gun-style design
- Clear, legible display with background lighting .
Furthermore, the laser temperature gun delivers extremely fast results with a speed of two measurements per second. This means that extensive surface temperature scans are also easy to handle.
Extended functions with the connectible probe, An optional external temperature probe to carry out contact measurements can also be connected to the testo 830-T4 laser temperature gun in addition to the non-contact IR measurement (e.g. for control purposes). There are a range of thermocouple probes available for temperature measurements of air, liquids, semi-solid media, and surface temperatures.
The comparative contact measurement with a surface temperature probe will help you determine the emission level of the surface material which helps you set the laser temperature gun emission level accordingly in order to achieve the best results in the subsequent IR measurement.
In case of surfaces with an extremely low emission level, we recommend using either an emission tape (optional), or the connectible contact probe (optional) throughout the measurement.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +400 °C |
| Accuracy | ±1.5 °C (-20 to 0 °C),±2 °C (-30 to -20.1 °C),±1 °C or ±1 % of mv (Remaining Range) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Dimensions | 190 x 75 x 38 mm |
| Operating temperature | -20 to +50 °C |
| Housing | ABS |
| Battery type | 9V block battery |
| Battery life | 15 h |
| Storage temperature | -40 to +70 °C |
| Weight | 200 g |
Infrared Thermometer - testo 835-T1
Model No: testo 835-T1
Part No: 0560 8351
Testo 835-T1 infrared thermometer is the ideal professional tool for a wide variety of thermal applications for objects that are small, hard to reach, moving or very hot.
- Measure safely and accurately even at high temperatures
- 4-point laser shows the exact measuring range, preventing incorrect measurements
- Safe measurements from a long distance, thanks to 50:1 optics
- Integrated emissivity measurement for absolute measuring reliability
- Convenient menu guidance with icons and joystick
- Measuring value and location memory, and data analysis on the PC with free PC software “EasyClimate“
Get started in the field of intelligent infrared measuring technology. This practical infrared thermometer testo 835 t-1 offers maximum safety and precision when measuring the temperature of smaller objects from a medium distance, e.g. monitoring wall temperature, troubleshooting in heating and air conditioning systems, or the quality control of industrially manufactured products.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +600 °C |
| Accuracy | ±2.5 °C (-30.0 to -20.1 °C),±1.5 °C (-20.0 to -0.1 °C),±1.0 °C (0.0 to +99.9 °C),±1 % of mv (Remaining Range) |
| Infrared resolution | 0.1 °C |
| Infrared resolution | 0.1 °C,0.1 %RH,0.1 °Ctd |
| General technical data | |
| Dimensions | 193 x 166 x 63 mm |
| Operating temperature | -20 to +50 °C |
| Product-/housing material | ABS + PC |
| Laser spot | on / off |
| Emissivity table | 20 values |
| Standards | EN 61326-1:2006 |
| Alarm function | >audible; Optical |
| Auto-off backlight | 30 s* |
| Auto-off instrument | 120 s* |
| Battery type | 3 batteries type AA (or USB operating with PC-Software) |
| Battery life | 25 h (typical 25°C without laser and backlight) 10 h (typical 25°C without backlight) |
| Display type | Dot Matrix |
| Memory | 200 measuring values |
| Storage temperature | -30 to +50 °C |
| Weight | 514 g |
Delivery Scope
testo 835-H1 infrared thermometer with moisture measuring function, 4-Point laser marking, measuring data addmistration, PC software, batteries, calibration protocol.
Infrared Thermometer with Humidity Measurement - testo 835-H1
Model No: testo 835-H1
Part No: 0560 8353
Testo 835-H1 infrared thermometer is the ideal professional tool for a wide variety of thermal applications for objects that are small, hard to reach and moving. Measurement of surface moisture with integrated moisture sensor.
- Measure safely and accurately
- 4-point laser shows the exact measuring range, preventing incorrect measurements
- Safe measurements from a long distance, thanks to 50:1 optics
- Integrated emissivity measurement for absolute measuring reliability
- Patented surface moisture measurement
- Convenient menu guidance with icons and joystick
- Measuring value and location memory, and data analysis on the PC with free PC software “EasyClimate“
With testo 835-H1, you can perform temperature and surface moisture measurements on walls, monitor and check air conditioning and ventilation systems, service and inspect industrial system to ensure constant high levels of quality in production processes are maintained. The testo 835-H1 is an ideal all-round device for a wide range of industrial and commercial applications.
What the testo 835-H1 infrared thermometer and surface moisture meter can do
– Measure the surface temperature and relative humidity and check the dew point and surface moisture
– Help to detect mold in buildings before it’s too late
– Carry out measurements on small, moving or hard-to-reach objects, accurately and safely
– Benefit from state-of-the-art technology and easy handling
– 4-Point-Laser: shows the exact measuring zone, effectively preventing wrong measurements
– 50:1 optics that provide you with excellent surface temperature measurements even over greater distances (distance 5 m = 10cm measurement spot)
– Adjustable degree of emission for measuring a wide variety of different surfaces
– Connectivity for temperature sensors: for additional contact measurements for materials with low degree of emission possible –simply connect your optionally available temperature sensor
– Easy-to-use, easy-to-follow menu guide thanks to icons and joystick
– Generate measuring points and save up to 200 measurements
– Define individual alarm thresholds, acoustic and optical alarm
– Show min/max values
– Backlit display
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +600 °C |
| Accuracy | ±2.5 °C (-30.0 to -20.1 °C),±1.5 °C (-20.0 to -0.1 °C),±1.0 °C (0.0 to +99.9 °C),±1 % of mv (Remaining Range) |
| Infrared resolution | 0.1 °C |
| Humidity – Capacitive (for testo 835-H1) | |
| Measuring range | 0 to 100 %RH |
| Accuracy | ±2 %RH,±0.5 °C |
| Infrared resolution | 0.1 °C,0.1 %RH,0.1 °Ctd |
| General technical data | |
| Dimensions | 193 x 166 x 63 mm |
| Operating temperature | -20 to +50 °C |
| Product-/housing material | ABS + PC |
| Laser spot | on / off |
| Emissivity table | 20 values |
| Standards | EN 61326-1:2006 |
| Alarm function | >audible; Optical |
| Auto-off backlight | 30 s* |
| Auto-off instrument | 120 s* |
| Battery type | 3 batteries type AA (or USB operating with PC-Software) |
| Battery life | 25 h (typical 25°C without laser and backlight) 10 h (typical 25°C without backlight) |
| Display type | Dot Matrix |
| Memory | 200 measuring values |
| Storage temperature | -30 to +50 °C |
| Weight | 514 g |
Infrared Thermometer for High Temperature - testo 835-T2
Model No: testo 835-T2
Part No: 0560 8352
Testo 835-T2 infrared thermometer is the ideal professional tool for a wide variety of thermal applications in the high temperature range for objects that are small, hard to reach, moving or very hot.
- Measure safely and accurately even at high temperatures
- 4-point laser shows the exact measuring range, preventing incorrect measurements
- Safe measurements from a long distance, thanks to 50:1 optics
- Integrated emissivity measurement for absolute measuring reliability
- Convenient menu guidance with icons and joystick
- Measuring value and location memory, and data analysis on the PC with free PC software “EasyClimate“.
Ideal for use in the glass, ceramics or the metal industry: the testo 835-T2 high temperature infrared thermometer is the ideal professional tool for a wide variety of thermal applications in the high temperature range. The testo 835-T2 infrared thermometer has an extremely wide temperature range which allows you to carry out thermal measurements up to 1500 °C – and all from a safe distance. It doesn’t matter whether the objects are small, hard to reach, moving or very hot. Thanks to the leading-edge technology tucked away inside, the testo 835-T2 high temperature infrared thermometer allows you to measure the temperature in all four cases quickly and safely.
– The 4-point laser clearly indicates the measuring area and prevents incorrect measurements
– The 50:1 optics allow you to carry out measurements from a long distance and still obtain excellent results (distance 5 m = 10 cm measuring spot)
– The integrated degree of emission table enables you to select the correct degree of emission of the measured surface
– The backlit display allows you to use your infrared thermometer in all lighting conditions .
The testo 835-T2 high temperature infrared thermometer also allows you to carry out contact temperature measurements. The thermometer is equipped with a connecting point for a wide range of optional temperature sensors. The temperature sensor can also be used to automatically measure the degree of emission of a particular surface. This makes it easier to carry out subsequent infrared measurements.
There is also a wide range of optional accessories – including a tripod and a robust carry case – that allows you to customize your testo 835-T2 infrared thermometer to suit your needs.
For easy analysis and easy use
The testo 835-T2 high temperature infrared thermometer comes with an easy-to-follow menu, self-explanatory icons and a user-friendly joystick. Your infrared thermometer can be used to create different measuring sites or save up to 200 readings while additional features including min/max values, adjustable thresholds and visual and acoustic alarms which are triggered when thresholds have been exceeded make work more efficient and life easier. The free-to-download “EasyClimate” software provides you with a quick and convenient means of analyzing your measuring data.
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -30 to +1500 °C |
| Accuracy | ±2.0 °C or ±1% of m.v. |
| Infrared resolution | 0.1 °C (-10.0 to +999.9°C ), 1 °C (+1000.0 to +1500.0 °C ) |
| Infrared resolution | 0.1 °C,0.1 %RH,0.1 °Ctd |
| General technical data | |
| Dimensions | 193 x 166 x 63 mm |
| Operating temperature | -20 to +50 °C |
| Product-/housing material | ABS + PC |
| Laser spot | on / off |
| Emissivity table | 20 values |
| Standards | EN 61326-1:2006 |
| Alarm function | audible; Optical |
| Auto-off backlight | 30 s* |
| Auto-off instrument | 120 s* |
| Battery type | 3 batteries type AA (or USB operating with PC-Software) |
| Battery life | 25 h (typical 25°C without laser and backlight) 10 h (typical 25°C without backlight) |
| Display type | Dot Matrix |
| Memory | 200 measuring values |
| Storage temperature | -30 to +50 °C |
| Weight | 514 g |
Food Thermometer - testo 105
Model No: testo 105
Part No: 0563 1051
The testo 105, a rugged and reliable food thermometer is used in the food industry to measure the core temperature of semi-solid media like meat and cheese, for example.
- Designed for daily use: rugged, can be cleaned under running water (IP65 protected)
- Changeable measuring tip: standard tip for semi-solid media, i.e. meat / long 200 mm measuring tip for frozen food (optional)
- Two adjustable thresholds, audible / visual alarm that are triggered when thresholds are crossed
- EN 13485 andHACCPcompliant.
The testo 105 digital food thermometer can measure the core temperature of semi-solid media like meat, cheese and jellies, for example. The probe sensor included in the scope of supply can be easily inserted into non-frozen food and food in liquid form. There is also an optional probe for measuring the core temperature of frozen foods to ensure that temperatures are within prescribed thresholds.
The testo 105 professional food thermometerThe testo 105 food thermometer has all the trappings of a professional digital food thermometer and all the features you need to make life – and work – easier: easy one-handed operation; compact, ergonomic design; backlit display; adjustable thresholds; an audible and visual alarm that alerts when thresholds are exceeded; belt clip and wall mount so that you always have your probe thermometer available with you – and that you know where it is supposed to be when you don’t have it.
Needless to say, in the interest of hygiene, the food thermometer can be cleaned under running water and is IP65 protected against dust and dirt ingress. And like all the testo temperature meters and thermometers for the food industry the testo 105 is conform to HACCP International and EN 13485.
Areas of application for the testo 105 digital food thermometerDepending on the type of probe sensor you are using – standard or 200 mm -the testo food probe thermometer is ideal for use in a wide range of applications and areas including food production, checking received goods, catering services, canteen kitchens, cold storage rooms and supermarkets.
| Temperature – NTC | |
|---|---|
| Measuring range | -50 to +275 °C |
| Accuracy | ±0.5 °C (-20 to +100 °C) ±1.0 °C (-50 to -20.1 °C) ±1 % of mv (+100.1 to +275 °C) |
| Resolution | 0.1 °C |
| General technical data | |
| Protection class | IP65 |
| Length probe shaft | shaft 100 mm |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| Battery type | 4 x Button cell LR44 |
| Battery lifeBattery life | 80 h |
Food-Thermometer - testo 106
Model No: testo 106
Part No: 0560 1063
testo 106 food- thermometer you will be well equipped to measure the core temperature of products in industrial kitchens, restaurant chains, supermarkets, or while food is in transit.
- For fast, accurate measurement of core temperatures (e.g. in food controls)
- Combined with the TopSafe protective case (can be ordered separately), the testo 106 is an EN 13485 certified and HACCP-compliant thermometer
- Fine measuring tip with a 2.2 mm diameter, puncture holes are barely discernible
The testo 105 digital food thermometer can measure the core temperature of semi-solid media like meat, cheese and jellies, for example. The probe sensor included in the scope of supply can be easily inserted into non-frozen food and food in liquid form. There is also an optional probe for measuring the core temperature of frozen foods to ensure that temperatures are within prescribed thresholds.
The testo 105 professional food thermometerThe testo 105 food thermometer has all the trappings of a professional digital food thermometer and all the features you need to make life – and work – easier: easy one-handed operation; compact, ergonomic design; backlit display; adjustable thresholds; an audible and visual alarm that alerts when thresholds are exceeded; belt clip and wall mount so that you always have your probe thermometer available with you – and that you know where it is supposed to be when you don’t have it.
Needless to say, in the interest of hygiene, the food thermometer can be cleaned under running water and is IP65 protected against dust and dirt ingress. And like all the testo temperature meters and thermometers for the food industry the testo 105 is conform to HACCP International and EN 13485.
Areas of application for the testo 105 digital food thermometerDepending on the type of probe sensor you are using – standard or 200 mm -the testo food probe thermometer is ideal for use in a wide range of applications and areas including food production, checking received goods, catering services, canteen kitchens, cold storage rooms and supermarkets.
| Temperature – NTC | |
|---|---|
| Measuring range | -50 to +275 °C |
| Accuracy | ±0.5 °C (-20 to +100 °C) ±1.0 °C (-50 to -20.1 °C) ±1 % of mv (+100.1 to +275 °C) |
| Resolution | 0.1 °C |
| General technical data | |
| Protection class | IP65 |
| Length probe shaft | shaft 100 mm |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| Battery type | 4 x Button cell LR44 |
| Battery lifeBattery life | 80 h |
Waterproof Food Thermometer - testo 108
Model No: testo 108
Part No: 0563 1080
The testo 108 digital food thermometer for measuring temperatures for super-fast spot checks and reliable results during food production, processing and storage.
- For carrying out temperature checks in the food industry
- Ready to go. One probe temperature sensor included, further type K and T temperature sensors (optional) can be connected
- Digital food thermometer also waterproof with connected probe sensor (IP67 protected)
- HACCP and EN 13485 compliant.
- Ideal for all sectors of the food industry. From buying to transport, from storage to production and control
- Protective softcase and type T thermocouple probe sensor included
- Super fast measurements, super reliable readings
- Easy to use with self-explanatory keys and large, easy-to-read display. No need for lengthy instructions
- Hygienic: softcase and food thermometer/sensor can be easily cleaned under running water
- HACCP and EN 13485 compliant.
Ideal for use during transport or storage of food, in restaurants, canteen kitchens or system catering: the testo 108 waterproof food thermometer enables you to integrate your temperature measurements effortlessly into your daily routine while making sure that the quality of your food complies with HACCP regulations
| Temperature – TC Type K (NiCr-Ni) | |
|---|---|
| Measuring range | -50 to +300 °C |
| Accuracy | ±0.5 °C (-30 to +70 °C) ±0.5 °C ±0.5 % of mv (-50 to -30 °C) ±0.5 °C ±0.5 % of mv (+70 to +300 °C) |
| Resolution | 0.1 °C |
| Temperature – TC Type T (Cu-CuNi) | |
| Measuring range | -50 to +300 °C |
| Accuracy | ±0.5 °C (-30 to +70 °C) ±0.5 °C ±0.5 % of mv (-50 to -30 °C) ±0.5 °C ±0.5 % of mv (+70 to +300 °C) |
| Resolution | 0.1 °C |
| General technical data | |
| Protection class | IP67 with TopSafe |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| Battery type | 3 AAA micro batteries |
| Battery life | 2500 h (typical, at 23 °C) |
Waterproof Digital Food Thermometer - testo 108-2
Model No: testo 108-2
Part No: 0563 1082
The testo 108-2 temperature measuring instrument can be used for quick spot temperature measurement in the food sector. Compared with the testo 108, the advantage of the testo 108-2 is that the probe can be locked on the temperature measuring instrument, ensuring a secure hold.
- Easy to operate and use: lockable probe for a secure hold
- Temperature measuring instrument with connected probe is waterproof (IP 67)
- Includes softcase and probe type T
- HACCP-compliant and certified to EN 13485.
In the food sector, temperature measurements are part of the daily routine. The only way you can thoroughly check and guarantee the quality of your products is with precise measurement.
The testo 108-2 temperature measuring instrument allows spot measurements in seconds. For transportation and storage of food, in restaurants, in large-scale kitchens and in the food service industry. The testo 108-2 temperature measuring instrument allows temperature measurement to be integrated into daily work routines with no added complications. And you do not have to worry about the obligatory HACCP regulations.
Advantages of the testo 108-2 temperature measuring instrument at a glance
- Lockable probe for a secure hold
- Auto-hold, hold and min./max. function Function
- Applicable everywhere in the food sector
- Easy handling even by frequently changing staff
- Probe can be stowed directly in the softcase
- Temperature measuring instrument with connected probe is waterproof in compliance with IP 67
- Large, clear display
| Temperature – TC Type T (Cu-CuNi) | |
|---|---|
| Measuring range | -50 to +300 °C |
| Accuracy | ±0.5 °C (-30 to +70 °C) ±0.5 °C ±0.5 % of mv (-50 to -30 °C) ±0.5 °C ±0.5 % of mv (+70 to +300 °C) |
| Resolution | 0.1 °C |
| Reaction time | 10 s |
| General technical data | |
| Protection class | IP67 with TopSafe |
| Measuring rate | 0.5 s |
| Features | Auto-hold, hold and min./max. function |
| Standards | EN 13485 |
| Battery type | 3 AAA micro batteries |
| Battery life | 2500 h (typical, at 23 °C) |
Temp. Meter - testo 110
Model No: testo 110
Part No: 0560 1108
Testo 110 digital temperature meter shows what it’s really made of when temperatures start to drop. Thanks to the NTC technology tucked away inside, it can measure temperatures in very low temperature environments.
- Audible alarm, user-defined thresholds
- HACCP compliant, certified according to EN 13485 for use in the food sector
- Extremely accurate, also in very low temperature ranges, i.e. cold storage rooms
- Optional connectable temperature sensor and wireless sensor for different applications in the field.
The testo 110 temperature meter enables them to rise to this challenge and provides them with an extremely accurate means of carrying out temperature measurements at extremely low temperatures. Ideal for use outdoors and in cold storage houses.
At-a-glance look at the benefits of the testo 110 :
- Precision you can rely on, including at very low temperatures – thanks to NTC technology: cold storage rooms, cold storage warehouses, outdoors – these are just a few of the places where you can count on the testo 110 to provide you with precise and reliable results
- Special features: large, crisp, two-line display; user-defined thresholds; audible alarm alerts when thresholds are exceeded; min/max value recognition; auto-hold, freezes the last reading
- Wide range of optional NTC sensors to suit your individual requirements: includes a wide variety of food sensors, i.e. frozen food probe, penatration/immersion probes, surface sensors and much, much more – select the sensors which best suit your needs
- Further practical accessories: from the TopSafe dishwasher safe protective cover to the testo turbo printer for on-the-spot print outs
| Temperature – NTC | |
|---|---|
| Measuring range | -50 to +150 °C |
| Accuracy | ±0.2 °C (-20 to +80 °C) ±0.3 °C Remaining Range |
| Resolution | 0.1 °C |
| General technical data | |
| Number of channels | 1-channel |
| Standards | EN 13485 |
| Battery type | 9V block battery |
Temperature Thermometer for Food - testo 112
Model No: testo 112
Part No:0560 1128
Testo 112 temperature measuring instrument for food inspectors, assessors and authorities. With NTC and Pt100 technology, this 1-channel temperature measuring instrument is exceptionally accurate.
- Water and dirt-repellent protective case TopSafe (optional), ideal for use in the food sector
- Useful functions: minimum/maximum value memory and acoustic alarm
- High-precision temperature measuring instrument for food, with PTB type approval – approved for official measurements
- An attachable temperature probe – NTC and Pt100 probes optionally available to meet numerous practical requirements.
Testo 112 high-precision, temperature measuring instrument is ideal for official control measurements carried out by food inspectors, assessors and authorities.
With its large measuring range of -50 to +300 °C, the testo 112 is also used for all areas relating to food quality control and also for temperature measurements carried out by veterinarians and pathologists.
Both NTC and Pt100 probes can be connected to the probe input, thus covering a wide range of temperatures, from frozen goods through to deep-fat fryer monitoring.
Temperature measuring instrument with PTB type approval
The testo 112 temperature measuring instrument and selected Pt100 and NTC probes (need to be ordered separately) are approved for official control measurements thanks to the PTB type approval and calibration capability.
For official measurements, Testo AG carries out the conformity assessment procedure prior to the sale of the food thermometer and probes. This new procedure is prescribed by the German Weights and Measures Act (MessEG) and Weights and Measures Ordinance (MessEV), which have been in force since 01/01/2015. It replaces the former initial calibration. Carrying out an initial calibration independently (e.g. at the request of the Office of Weights and Measures or a service provider such as Testo Industrial Services) is no longer possible.
The testo 112 temperature measuring instrument – all the benefits at a glance
- Reliable precision, at both high and low temperatures: with NTC and Pt100 technology, you can carry out reliable measurements at both low temperatures in cold storage warehouses and at high temperatures (e.g. for deep-fat fryer monitoring)
- NTC and Pt100 probes are ideal for practical requirements: various attachable temperature probes for food quality control and selected calibratable probes (e.g. food penetration probe or air probe) – are optionally available. Put together a kit that perfectly suits your requirements
- Safety: the integrated self-monitoring facility in the temperature measuring instrument provides peace of mind prior to carrying out the measurement
- Great features: large, illuminated display, acoustic alarm when limit values are exceeded, user can define their own limit values, minimum and maximum value detection, auto-hold function
- Practical accessories optionally available: TopSafe, dishwasher safe protective case. This is water and dirt-repellent and, in conjunction with a connected temperature probe, complies with protection class IP65. You can also take advantage of the benefits offered by the testo fast printer. This enables you to print out measurement data on site, with date and time
| Temperature – Pt100 | |
|---|---|
| Measuring range | -50 to +300 °C |
| Accuracy | ±0.2 °C (-50 to +200 °C) ±0.3 °C (Remaining Range) |
| Resolution | 0.1 °C |
| Temperature – NTC | |
| Measuring range | -50 to +120 °C |
| Accuracy | ±0.2 °C (-25 to +40 °C) ±0.3 °C (+40.1 to +80 °C) ±0.5 °C (Remaining Range) |
| Resolution | 0.1 °C |
| General technical data | |
| Protection class | With TopSafe IP65 |
| Measuring rate | 0.5 s |
| Standards | EU-guideline 2014/30/EU |
| Battery type | 9V block battery, 6F22 |
Temperature measuring instrument (Single Channel) - testo 926
Model No: testo 926
Part No:0560 9261
Testo 926 Single channel T temperature measuring instrument provides you with a quick, reliable and discreet means of checking the core temperature of food in commercial kitchens, catering and other commercial and industrial environments
- Connectivity for an attachable and a wireless sensor
- Wide range of optional sensors to suit your individual needs
- User-defined thresholds – audible alarmalerts when threshold exceeded
- Certified according to HACCP and EN 13485 – ideal for use with food.
The testo 926 temperature measuring instrument is certified according to HACCP and EN 13485 and ideal for use in the food sector for measuring food temperature. The temperature measuring instrument has user-defined thresholds that make it easier for you to carry out your daily work and an audible alarm that warns when thresholds are exceeded. Min/max values are saved automatically.
Flexible and wireless –sensors for the testo 926 for measuring food temperature
The testo 926 temperature measuring instrument for measuring food temperature comes with a wide selection of sensors for an even broader range of applications: sensors include standard food sensors, frozen food sensors, discreet sensors designed to leave only the smallest of puncture marks, heat resistant sensors designed to check oven temperatures and wireless sensors that transmit data directly to the main module.
You will need a sensor to start using your meter. Select one or more sensors from our selection to personalise your temperature measuring instrument to suit your individual requirements. Or order your start-up kit, which comes with a standard food sensor and get yourself started.
Standard design for use in the field. Extra add-ons for even more efficiency and convenience
Although the testo 926 temperature measuring instrument is standard-equipped with a whole host of practical features with a wide range of optional sensors – including a wireless sensor – which you can order to upgrade your meter and broaden your range of possibilities.
You may also choose to order the wireless testo turbo printer, which provides you with on-site documentation, or the TopSafe protective cover, which protects your food safety thermometer against dirt and water ingress and impact. Simply remove the cover and pop into the dishwasher to clean.
| Temperature – NTC | |
|---|---|
| Measuring range | -50 to +400 °C |
| Accuracy | ±0.3 °C (-20 to +70 °C) ±(0.7 °C ±0.5 % of mv) (Remaining Range) |
| Resolution | 0.1 °C (-50 to +199.9 °C) 1 °C (Remaining Range) |
| Temperature – TC Type K (NiCr-Ni) | |
| Measuring range | -50 to +400 °C |
| Accuracy | ±0.3 °C (-20 to +70 °C) ±(0.7 °C + 0.5 % of mv) (Remaining Range) |
| Resolution | 0.1 °C (-50 to +199.9 °C) 1 °C (Remaining Range) |
| Temperature – TC Type T (Cu-CuNi) | |
| Measuring range | -50 to +400 °C |
| Accuracy | ±0.3 °C (-20 to +70 °C) ±(0.7 °C + 0.5 % of mv) (Remaining Range) |
| Resolution | 0.1 °C (-50 to +199.9 °C) 1 °C (Remaining Range) |
| General technical data | |
| Protection class | IP65; TopSafe |
| Measuring rate | 0.5 s |
| Standards | EN 13485 |
| Battery type | 9V block battery |
Digital Temperature Instrument - testo 720
Model No: testo 720
Part No:0560 7207
Testo 720 single channel digital temperature instrument meter is needs of laboratories and the industry and comes with a wide range of optional connectable sensors for surface temperature, air temperature and immersion measurements.
- Port for one RTD or NTC sensor
- Wide range of optional sensors for individual requirements
- User-defined thresholds, audible alarm when thresholds are exceeded
- Optional accessories for individual adaptation, i.e. protection against aggressive media for use in laboratories.
Testo 720 digital temperature meter: versatile and precise
A sensor is needed to use the temperature meter. You can connect either an RTD or an NTC sensor. Select from a wide range of optional temperature sensors to find the sensor that best suits your individual applications. The testo 720 temperature meter is designed to allow you to carry out quick and accurate air temperature, surface temperature and immersion measurements.
A host of features including min/max values, a large, backlit display, user-defined thresholds and an audible alarm that is activated when thresholds are exceeded makes the temperature meter ideal for use in the field.
The testo 720 temperature meter – ideal for use in laboratories
The testo 720 digital temperature meter is ideal for use in laboratories: select from a wide range of accessories designed to ensure that your temperature meter is best equipped to suit your individual application.
- RTD laboratory temperature sensor: the glass-coated temperature sensor is resistant to aggressive media
- TopSafe protective case: this robust case protects against impact, dirt ingress and aggressive media. IP65ratedwithTopSafeandconnectedtemperaturesensor
- testofast printer for print outs on site: allows you to document results quickly and reliably to provide proof of measurements instead of having to fall back on specialist software
| Temperature – Pt100 | |
|---|---|
| Measuring range | -100 to +800 °C |
| Accuracy | ±0.2 % of mv (200 to +800 °C) ±0.2 °C (Remaining Range) |
| Resolution | 0.1 °C |
| Temperature – NTC | |
| Measuring range | -50 to +150 °C |
| Accuracy | ±0.2 °C (-25 to +40 °C) ±0.3 °C (+40.1 to +80 °C) ±0.4 °C (+80.1 to +125 °C) ±0.5 °C (Remaining Range) |
| Resolution | 0.1 °C |
| General technical data | |
| Product-/housing material | ABS |
| Battery type | 9V block battery |
| Battery life | 70 h |
Digital Surface Thermometer - testo 905-T2
Model No:testo 905-T2
Part No:0560 9056
Testo 905-T2 surface thermometer can measure the temperature reliably and impressively fast even on uneven surfaces. This efficient instrument used to measure temperature is therefore suitable for diverse applications in the heating, plumbing and refrigeration trade.
- Suitable for measurements on uneven surfaces
- Large measuring range: Temperature measurements up to +500 °C possible for a short time
- Extremely quick response time
- Convenient reading of measurement results on the swivel display
Testo 905-T2 surface thermometer provides you with the best piece of equipment for dealing with temperature measurements on both smooth and uneven surfaces. This is because its temperature probe (type K thermocouple) features a measuring head with sprung thermocouple strip that adjusts to the surface. This method prevents the temperature probe from tilting – and therefore false measurement results.
Another advantage of the temperature probe (type K thermocouple) is that its sprung thermocouple strip takes on the temperature of the object being measured very quickly. The temperature measuring instrument consequently achieves great accuracy and an impressively fast response time.
The testo 905-T2 instrument used to measure temperature also impresses with its large measuring range of -50 to +350 °C. Measurements of up to +500 °C are also possible for a short period (1 to 2 minutes). Its large measuring range means that the temperature measuring instrument has many different uses, e.g. in the area of heating, plumbing or refrigeration technology. The surface thermometer is particularly well suited to temperature measurements on pipes, as its thermocouple probe is easily able to deal with their uneven surfaces.
Extremely user-friendly surface thermometer
The testo 905-T2 instrument used to measure temperature is really easy to use: The measured values can be conveniently read from the clear display. They are also easily legible from different angles. This is provided for by the display’s swivel joint which can be constantly adjusted to your angle of vision.
If you forget to switch off the surface thermometer after measurement, it will automatically switch off after approx. 10 minutes of non-use.
| Temperature | |
|---|---|
| Measuring range | -50 to +350 °C (short-term to +500 °C) |
| Accuracy | ±1 °C (-50 to +99.9 °C) ±1 % of mv (Remaining Range) |
| Resolution | 0.1 °C |
| Reaction time | t99 = 5 s |
| General technical data | |
| Length probe shaft | 150 mm |
| Length probe shaft tip | 40 mm |
| Diameter probe shaft | 3 mm |
| Diameter probe shaft tip | 12 mm |
| Battery type | 3 AAA micro batteries |
Infrared-Thermometer - testo 805
Model No:testo 805
Part No: 0560 8051
Handy infrared thermometer for surface temperatures, ideal for use in food sector. checking incoming goods, refrigerated cabinet and supermarkets.
- Non-contact measurement of surface temperature, ideally suitable for the food sector
- Waterproof and robust thanks to dishwasher-safe protective cover TopSafe, according to protecton class IP65
- 1:1 optics for fast, easy measurements at close range
- Small and handy: fits in any jacket or trouser pocket
- Hold-function and display of min./max. values
- Scan mode for long-term measurement
Testo 805 mini infrared thermometer is perfect anywhere needing a quick surface temperature check: for example, you can use it for food controls in supermarkets to record the temperature of incoming goods, or to scan entire refrigerated sections. However, it is not only in the food sector (industry and retail), but also in building services that the Testo infrared thermometer performs reliably.
Top-performing, pocket size infrared thermometer
Its small size (80 mm long) makes the infrared thermometer particularly practical, fitting into any pocket and always on hand. Its 1:1 optics system means it is suitable for close-up temperature measurements. At the touch of a button, the Testo infrared thermometer measures the surface temperature of the object being measured without coming into contact with it. If you need to measure the temperature of entire pallets of goods or refrigerated sections you can use scan mode for continuous measurement.
Optionally you can equip the testo 805 infrared thermometer with the TopSafe protective case. This protects the measuring instrument from dirt and water in accordance with protection class IP 65. This protective case is of great benefit, e.g. in the food sector (e.g. food controls), where a humid environment and spray water can be expected. You can also order the infrared thermometer testo 805 directly together with the TopSafe protective case
| Temperature – Infrared | |
|---|---|
| Measuring range | -25 to +250 °C |
| Accuracy | ±3 °C (-25 to -21 °C), ±2 °C (-20 to -2.1 °C), ±1 °C (-2 to +40 °C), ±1.5 °C (+40.1 to +150 °C), ±2 % of mv (+150.1 to +250 °C) |
| Infrared resolution | 0.1 °C (-9.9 to +199.9 °C), 1 °C (Remaining Range) |
| Distance to measurment spot | 1:1 |
| Emissivity | 0.95 |
| General technical data | |
| Housing | ABS |
| Battery type | 1 x lithium type: CR 2032 |
| Battery life | 40 h (typical) |
Infrared Thermometer for Food - testo 831
Model No: testo 831
Part No: 0560 8316
Testo 831 food infrared temperature thermometer allows you to carry out quick and precise temperature measurements of whole pallets of food and smaller products from a distance. The food infrared thermometer is ideal for checking the temperature of incoming goodsand for use in food production.
- Non-contact, non-invasive temperature measurements due to IR technology
- Precise temperature measurements also of smaller products and from a distance
- Ultra-fast: two measurements per second – allows you to scan whole pallets in the blink of an eye
- Includes 2-point laser measuring spot marking, 30:1 optics, belt clip, batteries
- Practical pistol grip design: easy one-handed use; trigger button for quick and easy scans
- Ultra-fast measurements:the infrared thermometer allows you to carry out up to two measurements per second and multi-scan whole pallets or cooling shelves
- Precise temperature measurements – also from a distance: and all made possible thanks to 30:1optics. A measurement carried out over a distance of one meter generates a measuring spot with a diameter of only 3,6 cm. This allows you to measure the temperature of smaller products, like yogurt cartons for example
- Always on target: the two laser points generated by the 2-point laser measuring spot marker show you exactly which object you have set your sights on. The two laser points mark the diameter of the measuring circle in which the surface temperature is to be measured
- Alarm and min/max values: although your food temperature thermometer allows you to carry out measurements in the wink of an eye, an array of useful features ensures that you won’t miss a thing. Features include user-defined thresholds to determine individually when the visual and audible alarms are activated, a hold function that freezes the last measurement for easier display and min/max values
- Belt clip: there’s no better place to store your testo 831 infrared thermometer than in its protective case. Specially since it comes with a belt clip which allows you to attach it to your belt so that you always have it with you when you need it
- Wide measuring range:-30 °C (frozen food) up to +210 °C (hot counters)
- HACCP certified: the food infrared thermometer is HACCP certified
- Also available as a kit: and just in case you need tocarry out core temperature measurements too, you can also order your testo 831 infrared thermometer as a kit together with the testo 106 prod thermometer
| Temperature – Infrared | |
|---|---|
| Measuring range | -25 to +250 °C |
| Accuracy | ±3 °C (-25 to -21 °C), ±2 °C (-20 to -2.1 °C), ±1 °C (-2 to +40 °C), ±1.5 °C (+40.1 to +150 °C), ±2 % of mv (+150.1 to +250 °C) |
| Infrared resolution | 0.1 °C (-9.9 to +199.9 °C), 1 °C (Remaining Range) |
| Distance to measurment spot | 1:1 |
| Emissivity | 0.95 |
| General technical data | |
| Housing | ABS |
| Battery type | 1 x lithium type: CR 2032 |
| Battery life | 40 h (typical) |
Infrared Thermometer for Food - testo 831
Model No: testo 831
Part No: 0560 8316
- Practical pistol grip design: easy one-handed use; trigger button for quick and easy scans
- Ultra-fast measurements:the infrared thermometer allows you to carry out up to two measurements per second and multi-scan whole pallets or cooling shelves
- Precise temperature measurements – also from a distance: and all made possible thanks to 30:1optics. A measurement carried out over a distance of one meter generates a measuring spot with a diameter of only 3,6 cm. This allows you to measure the temperature of smaller products, like yogurt cartons for example
- Always on target: the two laser points generated by the 2-point laser measuring spot marker show you exactly which object you have set your sights on. The two laser points mark the diameter of the measuring circle in which the surface temperature is to be measured
- Alarm and min/max values: although your food temperature thermometer allows you to carry out measurements in the wink of an eye, an array of useful features ensures that you won’t miss a thing. Features include user-defined thresholds to determine individually when the visual and audible alarms are activated, a hold function that freezes the last measurement for easier display and min/max values
- Belt clip: there’s no better place to store your testo 831 infrared thermometer than in its protective case. Specially since it comes with a belt clip which allows you to attach it to your belt so that you always have it with you when you need it
- Wide measuring range:-30 °C (frozen food) up to +210 °C (hot counters)
- HACCP certified: the food infrared thermometer is HACCP certified
- Also available as a kit: and just in case you need tocarry out core temperature measurements too, you can also order your testo 831 infrared thermometer as a kit together with the testo 106 prod thermometer
| Temperature – Infrared | |
|---|---|
| Measuring range | -30 to +210 °C |
| Accuracy | ±1.5 °C or ±1.5 % of mv (-20 to +210 °C), ±2 °C or ±2 % of mv (Remaining Range) |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Protection class | IP30 |
| Measuring rate | 0.5 sec. |
| Battery type | 9V block battery, 6F22 |
| Battery life | 15 h |
| Display ligthing | illuminated |
Food Infrared Thermometer - testo 826-T2
Model No:testo 826-T2
Part No: 0563 8282
Food temperature measurements are mandatory for ensuring the quality of food stuffs in incoming Goods and in food production. Use the testo 826-T2 infrared thermometer to measure the temperature of your products and goods pallets in a non-destructive manner, all in a matter of seconds.
- Infrared thermometer measures the temperature without any contact and therefore in a non-destructive manner
- 6:1 optics and 1-point laser measurement spot marking
- Limit value monitoring with min./max. function, visual and acoustic alarm if limit values are exceeded
- In conjunction with the protective case TopSafe, the instrument is certified according to EN 13485 (TopSafe is included in the delivery)
Product quality assurance is essential in food production and processing. Food temperature measurement is an integral part of food quality control. With our testo 826-T2 infrared thermometer, food temperature measurements can be carried out quickly and easily by managers in supermarkets and in the food industry, as well as butchers and bakers.
Carry out non-contact food temperature measurement and more using the infrared thermometer
- Easily fulfil HACCP requirements: the infrared thermometer is HACCP-compliant and, in conjunction with the protective case TopSafe, certified according to EN 13485. This makes it particularly suitable for food quality control
- Measure quickly and precisely: with 2 measurements per second, the surface temperature of your goods is scanned quickly and in a non-contact, non-destructive manner, at a resolution of 0.1 °C
- Temperature limit values at a glance: up to two alarm limit values can be input into the infrared thermometer. This offers you the advantage of not constantly having to look at the display when measuring the temperature of goods pallets. A visual and acoustic alarm signal warns you as soon as upper or lower limit values are exceeded
- Min./max. value display and hold function: the min./max. display shows the highest and lowest temperature values from the last measurement. Therefore you can monitor your goods reliably. You can keep the last measured temperature values on the display by using the hold button
- 6:1 optics and 1-point laser measurement spot marker: use the 1-point laser to mark the centre of the measurement object. The 6:1 optics are particularly suitable for non-contact IR measurement at shorter to medium distances
- Practical accessories included: with the testo 826-T2 infrared thermometer you also get the practical protective case TopSafe. The protective case is robust, waterproof in compliance with protection class IP67 and can be cleaned in the dishwasher if necessary. The wall/belt holder enables the infrared thermometer to be stored securely.
Penetration Infrared thermometer testo 826-T4, It offers the same advantages as the testo 826-T2 infrared thermometer and also has a permanently attached penetration probe for measuring the temperature in the goods. The penetration probe offers you complete assurance about the core temperature (e.g. in yoghurts or meat), if prescribed temperature limit values for goods are exceeded during the infrared measurement.
| Temperature – Infrared | |
|---|---|
| Measuring range | -50 to +300 °C |
| Accuracy | ±1.5 °C (-20 to +100 °C), ±2 °C or 2 % of mv (Remaining Range) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Standards | EN 13485 |
| Battery type | 2 AAA micro batteries |
| Battery life | Approx. 20 h |
Immersion and Infrared Thermometer - testo 826-T4
Model No:testo 826-T4
Part No: 0563 8284
During food controls in Incoming Goods, you regularly check the temperature of your goods. The testo 826-T4 infrared penetration thermometer allows quick temperature scans by means of infrared measurement without damaging the products. If temperature limit values are exceeded, the permanently attached penetration probe can be used to take accurate core temperature measurements (e.g. in yoghurts).
- Infrared and core temperature measurements in one measuring instrument
- Infrared thermometer with 6:1 optics and 1 point laser measurement spot marker
- Easy limit value monitoring with the min./max. function; immediate alarm when limit values are exceeded
- Watertight and robust thanks to the TopSafe protective case.
Temperature checks of products and goods pallets are not only mandatory for incoming and outgoing goods, but also for the food manufacturing sector. With the testo 826-T4 infrared penetration thermometer you will have an HACCP-compliant and EN 13485-certified measuring instrument to hand which easily fulfils the HACCP regulations.
This is what the penetration infrared thermometer offers
You are especially reliant on quick, accurate measurement results for food controls in Incoming Goods. The slim line testo 826-T4 infrared penetration thermometer provides both and much, much more! See for yourself what the advantages of the HACCP thermometer are:
- Fast, accurate measurement results: At 2 measurements a second, infrared measurement allows you to scan the surface temperature of your products really fast. And that with an outstanding resolution of 0.1 °C. Should stipulated limit values be reached or exceeded, the permanently attached penetration probe will provide you with absolute certainty. In fact, this enables accurate measurement of the core temperature of food, e.g. yoghurt, cheese, and meat, etc.
- Temperature limit values at a glance: You can set up to two alarm limit values; as soon as these are exceeded or not attained, the HACCP thermometer will inform you by means of a visual and acoustic alarm signal. This means you do not have to look at the display permanently and yet have an eye on the temperature
- Min./max. value display and hold function: The min./max. display shows the highest and lowest values from the last measurement. This allows for safe, reliable monitoring of the product temperature. You can keep the last measured temperature values on the display by using the hold button
- 6:1 optics and 1 point laser measurement spot marker: The 1 point laser marks the centre of the object being measured during infrared measurement. The 6:1 optics of the infrared thermometer is suitable for measurements at closer to medium distances.
- In every respect HACCP: The infrared penetration thermometer is HACCP-compliant and certified in accordance with EN 13485. This makes it perfect for the food sector
- Practical accessories included: testo 826-T4 is equipped with the robust, watertight TopSafe protective case compliant with protection class IP67. If necessary, the TopSafe case can be cleaned in the dishwasher. The supplied frozen produce pre-driller even allows you to measure the core temperature of frozen foods. Safe storage of the HACCP thermometer is ensured by the wall/belt holder and the protective probe cap for the penetration probe.
| Temperature – NTC | |
|---|---|
| Measuring range | -50 to +230 °C |
| Accuracy | ±0.5 °C (-20 to +99.9 °C), ±1 °C or 1 % of mv (Remaining Range) |
| Resolution | 0.1 °C |
| Measuring rate | 1.25 s |
| Temperature – Infrared | |
| Measuring range | -50 to +300 °C |
| Accuracy | ±1.5 °C (-20 to +100 °C), ±2 °C or 2 % of mv (Remaining Range) |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Standards | EN 13485 |
| Battery type | 2 AAA micro batteries |
| Battery life | Approx. 20 h |
IR Thermometer - testo 810
Model No: testo 810
Part No: 0560 0810
Testo 810 IR thermometer allows the simultaneous measurement of the air temperature and surface temperature of the object being measured – without contact particularly suitable for use in the heating, ventilation and air conditioning trade.
- Display of the temperature difference
- Adjustable emission level
- Simultaneous measurement of the surface temperature and air temperature
- Non-contact measurement of the surface temperature (infrared thermometer).
Testo 810 IR thermometer measures the temperature on two channels. On the one hand, being an infrared thermometer it can take non-contact surface temperature measurements of the object being measured; on the other hand, it can measure the air temperature using its additionally integrated NTC sensor. The IR thermometer displays the temperature difference directly on the illuminated display.
Functions and applications of the testo 810 IR thermometer
The testo 810 IR thermometer is extremely well suited to use in heating, ventilation and air conditioning technology. At the touch of a button, you can measure the surface temperature of radiators, air vents, or windows and compare these to the air temperature.
The compact size of the infrared thermometer makes it easy to store in your pocket and immediately accessible for taking measurements. When measuring surface temperatures, you can mark the required spot with the integrated 1 point laser to achieve a specific measurement. The 6:1 optics of the infrared temperature measuring instrument is primarily suitable for measurements at closer to medium distances.
The IR thermometer emission level can also be individually set. This allows you to adjust it to the respective material properties of the surface being measured, as well as achieve the best measurement results. The integrated air temperature sensor is also highly reliable: this is an NTC temperature sensor which measures the air temperature with utmost accuracy.
Other practical features of the IR thermometer are the min./max. display and the hold function (to record measuring values). A protective cap and belt pouch (included in scope of delivery) add to the safety of the infrared thermometer.
| Temperature – NTC | |
|---|---|
| Measuring range | -10 to +50 °C |
| Accuracy | ±0.5 °C |
| Resolution | 0.1 °C |
| Measuring rate | 0.5 s |
| Temperature – Infrared | |
| Measuring range | -30 to +300 °C |
| Accuracy | ±2.0 °C (-30 to +100 °C) ±2 % of mv Remaining Range |
| Measuring rate | 0.5 s |
| Infrared resolution | 0.1 °C |
| General technical data | |
| Battery type | 2 AAA micro batteries |
| Battery life | 50 h (average, without display illumination) |
