Testo 606-1 moisture meter, protective cap, belt holder, calibration protocol, batteries.
Material Moisture meter - Testo 606-1
Model No: Testo 606-1
Part No: 0560 6060
Testo 606-1 Pocket size moisture meter for measures the moisture content in wood, walls and other surfaces and materials.
- Precise measurement of wood moisture
- Further characteristics curves for locating wet spots in building materials
- Hold-function for convenient read-out of measurement values
- Display illumination
The testo 606-1 moisture meter packed with a variety of quality features: easy to use; precise and absolutely reliable measurements; suitable for measuring moisture content for a wide range of different types of wood and building materials.
The two sensing electrodes are pushed firmly into the wood or building material where they measure the moisture content as a percentage based on the dry mass (dry weight).
The hold function freezes the last measurement while the backlit display ensures that the meter can be used in all lighting conditions. A slip-on protective cap and belt holder ensures the safe storage of the moisture meter and a hand strap helps prevent the meter from accidentally being dropped.
Practical –the characteristic curves in the testo 606-1 moisture meter
The testo 606-1 comes with a wide range of characteristic curves for wood and building materials. This allows the measured moisture content to be shown directly as a weight percentage.
Characteristic curves for precise wood moisture measurements:
- Beech
- Spruce
- Larch
- Oak
- Pine
- Maple
Characteristic curves for precise building material measurements:
- Cement scree
- Concrete
- Plaster
- Anhydrite screed
- Cement mortar
- Lime mortar
- Bricks
| Wood / Building material moisture | |
|---|---|
| Measuring range | 8.8 to 54.8 % by weight; beech, spruce, larch, birch, cherry, walnut |
| 7.0 to 47.9 % by weight; oak, pine, maple, ash-tree, douglas fir, meranti | |
| 0.9 to 22.1 % by weight; cement screed, concrete | |
| 0.0 to 11.0 % by weight; anhydrite screed | |
| 0.7 to 8.6 % by weight; cement mortar | |
| 0.6 to 9.9 % by weight; lime mortar, plaster | |
| 0.1 to 16.5 % by weight; bricks | |
| Material | ±1 %, 0.1, 1 s |
| General technical data | |
| Operating temperature | -10 to +50 °C |
| Battery type | 2 AAA micro batteries |
| Storage temperature | -40 to +70 °C |
