Testo 440 air velocity and IAQ measuring instrument, 3 x AA batteries, USB cable and calibration protocol, Hot wire probe (Ø 9 mm) with fixed cable (length 1.7 m) including temperature sensor, with telescope (0.85 m) and Basic case
Hot Wire Anemometer - Testo 440 Hot Wire Kit
Model No: Testo 440 Hot Wire Kit
Part No: 0563 4400
Testo 440 Hot Wire Anemometer Kit for carrying out measurements in ventilation ducts, the testo 440 air velocity and IAQ measuring instrument and the hot wire probe (Ø 9 mm) including temperature sensor.
Clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature
Automatic absolute pressure compensation guarantees accurate measurement results
Kit for carrying out measurements in ventilation ducts: the testo 440 air velocity and IAQ measuring instrument and the hot wire probe (Ø 9 mm) including temperature sensor are all safely stowed away in the case. So you can get down to work straight away!
Use the testo 440 air velocity and IAQ measuring instrument in combination with high-quality probes to measure and store all air velocity and IAQ parameters (please order probes separately). Up to 3 probes can be connected simultaneously: a Bluetooth probe, a wired probe and a temperature probe with type K thermocouple connector. Automatic probe detection and clearly structured measurement menus guarantee simple operation and will make your day-to-day work easier.
Hot wire probe – features
Use the fixed cable to connect the hot wire probe to the measuring instrument.
The probe is equipped with a telescope, which can be extended to a maximum length of 0.85 m. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.
The clearly structured measurement menu for volume flow makes the measuring instrument intuitive to operate. The volume flow is precisely calculated thanks to convenient input of the size and geometry of the duct cross-section. Timed and multi-point mean calculation, average volume flow, current reading and min./max. values are displayed in the measuring instrument.
Integrated sensor protection: when you are not using the hot wire probe, the rotatable protective cap protects the air velocity sensor from dirt and mechanical stress.
Intelligent calibration concept
You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe in for calibration – so the measuring instrument remains in continuous use.
Areas of application for the hot wire probe
Ventilation ducts: Use the hot wire probe to measure air velocity and air temperature in ventilation ducts with reliability. Benefit from fast calculation of the volume flow: in the “volume flow” measurement menu of the compatible measuring instrument (please order separately), configure the dimensions and geometry of the duct cross-section – the measuring instrument shows you the volume flow straight away.
| Temperature – NTC | |
|---|---|
| Measuring range | -20 to +70 °C |
| Accuracy | ±0.5 °C |
| Resolution | 0.1 °C |
| Velocity – Hot wire | |
| Measuring range | 0 to 30 m/s |
| Accuracy | ±(0.03 m/s + 4 % of mv) (0 to 20 m/s) ±(0.5 m/s + 5 % of mv) (20.01 to 30 m/s) |
| Resolution | 0.01 m/s |
| General technical data | |
| Storage temperature | -20 to +70 °C |
| Operating temperature | -20 to +70 °C |
| Cable length | 1.7 m |
| Length telescope | 850 mm |
| Probe head diameter | 9 mm |
| Diameter telescope | 12 mm |
